Zentrix Lab validates AgroGuard smart pheromone monitoring system at La Mayora

PRESS RELEASE
16.10.2026.

AI, computer vision, 5G and edge processing come together in a field-deployed system for remote pest monitoring in agriculture

Belgrade / Málaga, October 2026 – Zentrix Lab has completed a major field-validation milestone for AgroGuard, its AI-enhanced pheromone monitoring system for agriculture. The system is deployed at the La Mayora Experimental Station in Málaga, Spain, where a connected pheromone trap, camera-equipped edge devices, 5G connectivity and AI processing are operating together in a real agricultural environment.

AgroGuard deployed in an avocado orchard at La Mayora Experimental Station, Málaga.

From pheromone traps to connected pest monitoring

Pheromone traps are widely used to monitor insect activity, but the monitoring process still depends heavily on periodic field visits and manual inspection. AgroGuard adds a digital layer to this workflow by combining a pheromone-based trap with imaging, connected edge hardware and artificial intelligence.

A camera periodically captures the monitoring surface inside the trap. A Raspberry Pi manages image acquisition and metadata, while the field device transmits the data through the 5G environment at La Mayora. The images are then processed on edge infrastructure, where AI models detect and count insects before the results are presented through the AgroGuard dashboard.

Pheromone trap  →  Camera  →  Raspberry Pi  →  5G  →  Edge AI  →  Dashboard

Built and tested in the field

The field deployment combines the pheromone trap, sticky monitoring surfaces, camera, Raspberry Pi and connectivity equipment.

During the October field validation, the Zentrix Lab team inspected the complete deployment in its operating environment: the physical trap, pheromone and sticky monitoring surfaces, camera and Raspberry Pi setup, connectivity equipment, remote data path, AI processing and dashboard integration. The deployment includes one complete trap and additional connected Raspberry Pi nodes used to validate the architecture across multiple field devices.

The work is particularly important because agricultural monitoring systems are distributed by nature. Devices need to keep operating outdoors, often with limited direct supervision, while maintaining connectivity, recovering from interruptions and providing enough information for remote maintenance. AgroGuard was designed around these constraints, with automated capture services, retry and recovery logic, device logging and remote monitoring built into the field software.

Measuring the complete field-to-AI workflow

The field deployment allowed Zentrix Lab to measure how the complete system behaves from the moment an image leaves the trap to the moment a result becomes available. In the evaluated 5G and edge setup, image uplink latency was approximately 60 milliseconds, while the measured image-delivery rate reached 100%. Radio-monitoring telemetry was available for more than 99% of captured events across the deployed nodes.

AI processing and counting were also evaluated as part of the end-to-end workflow. The results are encouraging and support the use of automated image analysis for pest-monitoring applications, while additional target-species and seasonal field data will continue to strengthen model performance across real agricultural conditions.

What the farmer sees

The technical complexity remains behind the scenes. For the end user, the aim is simple: make field information easier to access and act on. Through the AgroGuard dashboard, farmers and agronomists can review trap images, detected insect activity, monitoring history and system status without first travelling to every monitoring point.

AgroGuard dashboard used to review field images, detections and monitoring information.

Designed to support agricultural decisions

AgroGuard is not designed to replace agronomic expertise or automatically decide when a treatment should be applied. Its role is to give farmers and agronomists better visibility into what is happening in the field, so they can focus attention where it is most useful.

This can support a more efficient monitoring workflow: earlier awareness of pest activity, better prioritisation of field inspections, fewer unnecessary visits and a clearer history of what has been observed at each monitoring point. As the system is expanded, the same architecture can be adapted to orchards, vineyards, greenhouses and other environments where distributed pest monitoring is required.

Combining AI, IoT and edge connectivity in a practical agricultural system

AgroGuard reflects Zentrix Lab’s broader approach to applied technology development: bringing hardware, software, connectivity and AI together around a real operational problem. The field validation at La Mayora moves the solution beyond a laboratory prototype and demonstrates how connected sensing and edge intelligence can be used directly in agricultural environments.

Further work will focus on expanding field data, strengthening target-species performance and gathering additional feedback from farmers and agricultural professionals as the system moves toward broader practical use.

About AgroGuard

AgroGuard is an AI-enhanced pheromone monitoring system developed by Zentrix Lab for scalable, remote pest monitoring. It combines pheromone-based trapping, computer vision, connected IoT devices, 5G communication, edge processing and an end-user dashboard to provide timely field information to farmers and agronomists.

About Zentrix Lab

Zentrix Lab is a European technology company delivering software engineering, artificial intelligence and hardware development for complex systems, from connected devices to cloud and edge platforms. With offices in Tallinn, Estonia, and Pančevo, Serbia, the company works across agriculture, fintech, retail, health, logistics, energy, telecommunications and space. Its expertise spans AI and machine learning, IoT and sensing, cybersecurity, data engineering, edge and cloud systems, and advanced digital platforms.

About 6G-PATH

6G-PATH (6G Pilots and Trials Through Europe) helps EU companies develop and integrate new tools and products with 5G/6G networks while measuring key performance and key value indicators (KPIs and KVIs). The project brings together testbeds and use cases across four verticals – health, education, smart cities and farming – including the farming testbed at La Mayora Experimental Station in Málaga. More information: smart-networks.europa.eu.

Media Contact – Zentrix Lab
Jelena Vasic | Communication Manager